Vonets VAP11G
Buy Now!

Vonets VAP11G

WiFi G Bridge

Description

Vonets VAP11G WiFi Bridge allows a WiFi connection in devices that only have RJ45 network port. Its simple setup, in 2 minutes. Need feeding between 5V and 15V obtainable USB port or external power supply.

Features

  • It can be used for any wireless network product.
  • IEEE 802.11 B/G compliant.
  • Support WEP (64 & 128 bits), WPA y WPA2 Security access.
  • Support SSID broadcast.
  • Frequency: 2.4Ghz.
  • Reception signal 100 meters without obstacles, but between 25 and 30 meters.
  • The new addition of a USB wire is to connect a computer (desktop, laptop)for power, no need extra power adapter.
  • Support Wifi model: AP Client
  • Dimensiones muy pequeñas: 1.5cm x 4.5cm x 9cm.
  • Certificado CE.
  • Support any VoIP ATAs and VoIP Phones.
  • Support any IP camera.

There are 2 ways to feed the VAP11G directly connecting it to a USB port or using a DC ADAPTER should not exceed 15V. In this way we can power the device itself, Ip camera, receiver, etc ...

We only have to install the software on a PC or Laptop to connect the set and finally VAP11G RJ45 cable to the device.

Specs

General
Frequency 2.4Ghz
IEEE 802.11 version B/G compliant
Support SSID broadcast YES
Support Wifi model AP Client
VoIP ATAs and VoIP Phones Supported
Security access Support WEP (64 bit), WEP (128 bit), WPA, WPA2
Connection
Ethernet 1x 10/100 base Ethernet cable header
Power In 1x DC-2.0 female
Power Out 1x DC-2.0 male
Power
Input Voltage DC 5V-15V;
Consumption Less than 1.5W
More
Certificates FCC/CE

Images

Vonets VAP11G
Vonets VAP11G
Vonets VAP11G